How to install Hardwood flooring

A candidate interested in how to install a hardwood floor may find lots of possibly confusing information on the web. The fact is, hardwood floor installation is no simple task to perform.

Additionally, the nuances of installation for a particular home or room usually involves a plethora or variables. For example, the room requires precise measurement, so that the performer can select the correct size planks to install. The existing floor undercoatings may easily require replacement or removal, before installing new hardwoods or overlays.

Is there a squeaky spot under the floor? Also, do you have the correct vapor barrier to lay down before installation begins?

In a nutshell, there are six basic steps for installation of a hardwood floor. Nonetheless, the craft person has to evaluate and decide, in advance, on exact details about whether or not to use solid wood, plywood, or even additional subflooring materials. Briefly, the six steps on how-to-install-a-hardwood-floor are as follows:

1. Calculate, decide upon, plus order all of the exact materials you will require.

2. Prepare your subfloor by fastening properly coated paper flooring underlay to it, plus allow time for humidity acclimation.

3. Lay down and mark out the correct placement for the new flooring.

4. Attach the first row to your subfloor, and also cut plus fasten next set of flooring strips.

5. Assemble the last row of flooring and properly fasten it into place.

6. For unfinished solid flooring, then sand and finish the final surface.

Now, here are slightly more detailed instructions which most commonly apply to typical hardwood floor installation…

Notice where the wall base and floor joists line up, and then use chalklines to mark those locations.

Next, one must calculate direction for floor joists which maintain the subfloor. For best results, carefully utilize a perpendicular pattern to install your flooring. Usually, a long, external wall provides the most easily visible line for the start of hardwood floor installation.

Do you already know the floor joist positions? If so, then you can mark them at base molding points, so that these marks will not show later.

Moving forward, apply your vapor barrier. For optimum noise reductions, Kraft paper, asphalt laden at fifteen pounds is likely the best resource for this task. Try to use a three-inch edge overlap on the paper. You may find that areas like fireplaces remain amenable for paper trimming using an ordinary utility knife.

Now, securely staple your underlay to the subfloor.

Kitchen in new construction home with cherry wood floor

Set chalk-lines at forty-eight inches of the long wall, at both ends. Do this TOWARD your room, and then assure to make pencil marks for alignment and identification.

Assure that your chalk line provides the best guide. In other words, make it perfectly parallel to the wall because this advance alignment will refine your floorboard layout. Work gradually across the floor to install each of these flooring sets.

Now, have you also checked both ends for equal distancing? Start measuring from the opposite wall to verify. When such measurements are perfect, your opposite wall remains in its parallel position. Do not move forward without assuring a straight line at this point in your installation.

After checking your progress up to this point, you may snap the paper chalk-lines at floor joist locations and know exactly where your strongest nail backing exists.

At this stage of reading, suffice it to say that generic instructions on how to install a hardwood floor can be extremely helpful. Nonetheless, almost never should one throw out the consideration of hiring a pro to perform this type of precise workmanship. Should you still wish to do it yourself, then at the very least, carefully study manufacturer handbooks and guidelines for specific hardwood flooring installation.

Get more details about shank flooring, nail striking, and hardwood floor tongue fitting from the customer service professionals at Jimmy’s hardwood flooring website.LEARN MORE

The following two tabs change content below.

admin

Latest posts by admin (see all)

Pin It on Pinterest

Shares
Share This
Read previous post:
Tips About Oak Flooring

Ten Signs You Should Invest in Hardwood Flooring

Close